开始老是down机，以my-huge为基础配了很多次，都不行，
后来，借用了mail.sanook.com的配置，撑了一断时间，还是不理想。
再借用网易(163.com)一个子项目的my.cnf试了一下，几个月没down，先用它撑一下。
注：网易使用的是2G内存的。
共享一下：
# Example MySQL config file for very large systems.
#
# This is for a large system with memory of 1G-2G where the system runs mainly
# MySQL.
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /var/lib/mysql) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /var/lib/mysql/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port = 3306
socket = /var/lib/mysql/mysql.sock
skip-locking
skip-innodb
skip-bdb
#back_log=100
back_log=200
#key_buffer=500M
key_buffer=512M
#key_buffer = 384M
#max_allowed_packet = 2M
#max_allowed_packet = 1M
max_allowed_packet = 4M
#table_cache = 512
table_cache = 1024
#sort_buffer_size=32M
#sort_buffer_size = 2M
sort_buffer_size = 16M
#read_buffer_size = 8M
#read_buffer_size = 2M
read_buffer_size = 16M
#read_rnd_buffer_size = 16M
#read_rnd_buffer_size = 8M
read_rnd_buffer_size = 32M
#myisam_sort_buffer_size = 256M
myisam_sort_buffer_size = 64M
#thread_cache =80
thread_cache = 8
#query_cache_size = 64M
#query_cache_size = 32M
query_cache_size = 16M
log-slow-queries=/var/log/slowlog.log
long_query_time = 2
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 4
default-character-set=utf8
### mysql tuning
#set-variable = max_user_connections=600
set-variable = max_user_connections=1000
set-variable = max_connections=1000
#set-variable = table_cache=1200
#set-variable = max_allowed_packet=1M
#set-variable = max_connect_errors=999999
#set-variable = max_connect_errors=20
set-variable = max_connect_errors=1000
set-variable = wait_timeout=10
#set-variable = interactive_timeout=300
set-variable = interactive_timeout=120
#set-variable = tmp_table_size = 2M
#set-variable = join_buffer_size = 2M
###
# Don't listen _disibledevent=>mysql/mysql-bin.log
# binlog-do-db = exampledb
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening _disibledevent=>
#
# binary logging - not required for slaves, but recommended
log-bin
binlog-do-db = hompy_mweb
# Point the following paths to different dedicated disks
#tmpdir = /tmp/
tmpdir = /var/mysqltmp
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using BDB tables
#bdb_cache_size = 384M
#bdb_max_lock = 100000
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql/
#innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql/
#innodb_log_arch_dir = /var/lib/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 384M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 100M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
default-character-set=utf8
[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
最新评论